Wheel brush slim crimped RBU dia. 100x12x16 mm hole DIAMOND filament dia. 0.35 mm grit 600

Technical information

Wheel brush slim crimped RBU dia. 100x12x16 mm hole DIAMOND filament dia. 0.35 mm grit 600

Dia. external: 100 mm
Dia. filament material: 0.35 mm
Dia. hole: 16 mm
Filament material: Diamond (DIA)
Grit size: 600
Length, filament: 19 mm
Max. RPM: 12000 RPM
Mounting system: Centre hole
RPM, optimum, from: 2000 RPM
RPM, optimum, to: 5000 RPM
Width: 12 mm
Packaging unit: 1 piece

Description

Brushes with diamond (DIA) filament material are suitable for applications that place particular demands on the aggressiveness of the brush. They are primarily used on materials with high material strength.

Plastic filament withstands temperatures up to 220 °C.

Excellent for medium-duty hand-held or automated brushing of workpieces with large surfaces.

Advantages

The special design enables bunching to create wide gapless rollers. This enables a uniform surface finish to be achieved.
Highly flexible, enabling optimal adjustment to the workpiece contour.
Abrasive grains are embedded in flexible plastic filaments, which means that the filament works on the sides as well as at the tip.
Can be used with all commercially available stationary drive systems and bench grinders thanks to the variable hole diameter.

Recommendations for use

Please observe the recommended rotational speeds.
Use coolant for applications where large amounts of heat are produced.

Materials that can be worked: Bronze; Cast iron; Cast steel; Cobalt-based alloys; Hard non-ferrous metal; High-temperature-resistant materials; Nickel-based alloys (e.g. Inconell and Hastelloy); Nickel or titanium-based superalloys; Other non-ferrous metals; Soft titanium alloys (tensile strength 500 N/mm²); Stainless steel (INOX); Steel, cast steel; Steel materials with a hardness > 54 HRC; Steels up to 1,200 N/mm² (< 38 HRC); Titanium; Titanium alloys; Tungsten carbide; Wear-resistant coatings (powder metal alloys and hardfacing alloys)

Applications: Cleaning; Deburring

Drive types: Bench grinder; Drive spindle; Flexible shaft drive; Straight grinder

Downloads

Wheel brushes crimped slim, with hole

Wheel brush slim crimped RBU dia. 100x12x16 mm hole DIAMOND filament dia. 0.35 mm grit 600

Matching tool drive

PFERD Newsletter subscription