The correct rotational speed for any material – in our free white paper.
Legal notice Data protection Career

BW 10 SE 11 DIN10/G28 oHA

Flexible shaft BW 10 SE 11 DIN10/G28 without handpiece 18,000-750 RPM

BW 10 SE 11 DIN10/G28 oHA
Item number:
86200516
EAN:
4007220423233
Flexible shaft BW 10 SE 11 DIN10/G28 without handpiece 18,000-750 RPM 1
Flexible shaft BW 10 SE 11 DIN10/G28 without handpiece 18,000-750 RPM 1
Technical data
Login / Register
Retailers-Search
Technical information
Flexible shaft BW 10 SE 11 DIN10/G28 without handpiece 18,000-750 RPM
Dia. drive-side coupling [mm]
30
Dia. external
22 mm
Drive-side coupling, DIN
10
Handpiece-side coupling G
28
Handpiece-side coupling dia. [mm]
28
Height
22 mm
Length
1600 mm
Net weight
2.232 kg
PFERD TOOLS type
BW 10 SE 11 DIN10/G28 oHA
Rotational speed range
750 - 18.000 RPM
Version
Flexible shaft system 10
Width
22 mm
Packaging unit
1 piece
Description

Flexible shafts consist of three components which can be combined in different ways: the flexible core (SE), the flexible casing (SCH), the handpiece (HA).

The flexible core consists of four to ten layers of wire, conforming to DIN 2076, and is specially designed for high-speed clockwise rotation. The coupling is securely press-fitted to the core. After approximately 100 operating hours, the core of the flexible shaft must be re-lubricated. The flexible casing consists of oil-resistant rubber; the interior being a flat steel spiral and the outside being solid rubber. The connection couplings are pressed on firmly and encased in a rubber sheath as reinforcement. Because of low noise emissions, continuous operation with little fatigue is possible. Exchangeable collets enable a wide range of tools to be mounted. The sliding coupling enables quick handpiece changes.

Flexible shaft without handpiece.
Recommendations for use
  • It is essential that the rotational speed and power output do not fall below or exceed the specified ranges.
  • It is not possible to repair cores and flexible casings. We recommend replacement with pre-assembled new parts.
  • When using flexible shafts, please ensure that the shafts are not bent beyond the specified radius of curvature. The smallest possible radius of curvature is given for each flexible shaft.
  • The radius of curvature should not be smaller than 170 mm.
  • For maintenance of the flexible shaft, PFERD TOOLS recommends the P-SET BW 10/12 maintenance set with flexible shaft grease FT 4.
Ordering notes
  • Special lengths available on request.
  • Cores and hoses with double-sided sliding coupling on request.
Downloads
wzh25-catalogue-9-web-int-en.pdf katalog-9-update-2022-web-en.pdf
See more
Scroll to top

PFERD TOOLS Newsletter subscription

Register here free of charge for our PFERD TOOLS newsletter and receive all the latest news on products, services and promotions from the world of PFERD TOOLS on a regular basis.