The correct rotational speed for any material – in our free white paper.
Legal notice Data protection Career

BW 12 DIN10/G28 oHA

Flexible shaft BW 12 DIN10/G28 without handpiece 12,000-850 RPM

BW 12 DIN10/G28 oHA
Item number:
86200518
EAN:
4007220429327
Flexible shaft BW 12 DIN10/G28 without handpiece 12,000-850 RPM 1
Flexible shaft BW 12 DIN10/G28 without handpiece 12,000-850 RPM 1
Technical data
Login / Register
Retailers-Search
Technical information
Flexible shaft BW 12 DIN10/G28 without handpiece 12,000-850 RPM
Dia. drive-side coupling [mm]
30
Dia. external
25 mm
Drive-side coupling, DIN
10
Handpiece-side coupling G
28
Handpiece-side coupling dia. [mm]
28
Height
25 mm
Length
2102 mm
Net weight
3.75 kg
PFERD TOOLS type
BW 12 DIN10/G28 oHA
Rotational speed range
850 - 12.000 RPM
Version
Flexible shaft system 12
Width
25 mm
Packaging unit
1 piece
Description

Flexible shafts consist of three components which can be combined in different ways: the flexible core (SE), the flexible casing (SCH), the handpiece (HA).

The flexible core consists of four to ten layers of wire, conforming to DIN 2076, and is specially designed for high-speed clockwise rotation. The coupling is securely press-fitted to the core. After approximately 100 operating hours, the core of the flexible shaft must be re-lubricated. The flexible casing consists of oil-resistant rubber; the interior being a flat steel spiral and the outside being solid rubber. The connection couplings are pressed on firmly and encased in a rubber sheath as reinforcement. Because of low noise emissions, continuous operation with little fatigue is possible. Exchangeable collets enable a wide range of tools to be mounted. The sliding coupling enables quick handpiece changes.

Flexible shaft without handpiece.
Recommendations for use
  • It is essential that the rotational speed and power output do not fall below or exceed the specified ranges.
  • It is not possible to repair cores and flexible casings. We recommend replacement with pre-assembled new parts.
  • When using flexible shafts, please ensure that the shafts are not bent beyond the specified radius of curvature. The smallest possible radius of curvature is given for each flexible shaft.
  • The radius of curvature should not be smaller than 240 mm.
Ordering notes
  • Special lengths available on request.
  • Cores and hoses with double-sided sliding coupling on request.
Downloads
wzh25-catalogue-9-web-int-en.pdf katalog-9-update-2022-web-en.pdf
See more
Scroll to top

PFERD TOOLS Newsletter subscription

Register here free of charge for our PFERD TOOLS newsletter and receive all the latest news on products, services and promotions from the world of PFERD TOOLS on a regular basis.