COMBIDISC diamond abrasive disc CD dia. 38 mm D251/P 60 for titanium, glass, GRP and stone

Technical information

COMBIDISC diamond abrasive disc CD dia. 38 mm D251/P 60 for titanium, glass, GRP and stone

Abrasive: Diamond
Clamping system: CD system
Dia. external: 38 mm
Grit size: 251
RPM, optimum, from: 5000 RPM
RPM, optimum, to: 10000 RPM
Packaging unit: 10 pieces

Description

Exceptionally suitable for work on wear-resistant coatings and for hard facings made of tungsten carbide, chromium carbide, titanium carbide, etc. Particularly recommended for work on materials used for aircraft engine construction and for working on extremely hard materials.

Grit size according to ISO 6344: P 60. The CD clamping system has a threaded connection with female thread (metal/plastic) on the tool side. Also suitable for the following commonly used systems: PSG, Power Lock Type II "turn on", SocAtt, Turn-On.

Advantages

High economic efficiency as tool can be changed quickly.
Very comfortable due to ease of use and low-vibration working.
No disruptions in use due to adhesion, slipping or coming loose.

Recommendations for use

Use COMBIDISC abrasive discs with an abrasive disc holder on flexible shaft drives with an angle handpiece, or small compressed-air or electric angle grinders.
Use grinding oil that is suitable for the material in order to significantly increase the tool life and the abrasive performance of the tools.
For the best results, use at a recommended cutting speed of 10-20 m/s.
Use with hard or medium-hard COMBIDISC abrasive disc holders.

Ordering notes

Please order abrasive disc holder separately.
The grit size is specified in μm.

Safety notes

The maximum permitted peripheral speed is 50 m/s.
For safety reasons, the maximum permitted rotational speed indicated must never be exceeded.

Materials that can be worked: Cobalt-based alloys; Fibre-reinforced thermosetting plastics (GRP, CRP); Nickel-based alloys (e.g. Inconell and Hastelloy); Stone; Thermoplastics; Titanium; Titanium alloys

Applications: Deburring; Leveling; Roughening; Sharpening; Step-by-step fine grinding; Surface work; Working on edges; Work on weld seams

Drive types: Angle grinder; Cordless angle grinder; Drive spindle; Flexible shaft drive; Straight grinder

PFERDVALUE

PFERDEFFICIENCY

recommends COMBIDISC tools to reduce tool changing and setting-up time.

PFERDERGONOMICS

recommends COMBIDISC as an innovative tool solution to sustainably reduce the vibration, noise and dust produced during use and to improve comfort when working.