COMBIDISC Zirkon abrasive disc CDR dia. 75 mm Z60 for hardened steel

Technical information

COMBIDISC Zirkon abrasive disc CDR dia. 75 mm Z60 for hardened steel

Abrasive: Zirconia alumina Z
Clamping system: CDR system
Dia. external: 75 mm
Grit size: 60
RPM, optimum, from: 2500 RPM
RPM, optimum, to: 9000 RPM
Packaging unit: 50 pieces

Description

For coarse grinding work with a high stock removal rate and a long tool life.

The CDR clamping system has a threaded connection with male thread (plastic) on the tool side. Also suitable for the following commonly used systems: Roloc™, Lockit, Speed Lok TR, Power Lock Type III, Fastlock-System B, Roll-On.

Advantages

High economic efficiency as tool can be changed quickly.
Very comfortable due to ease of use and low-vibration working.
No disruptions in use due to adhesion, slipping or coming loose.
Particularly high stock removal rate in coarse grinding applications using grit size 60.

Recommendations for use

Use COMBIDISC abrasive discs with an abrasive disc holder on flexible shaft drives with an angle handpiece, or small compressed-air or electric angle grinders.
Use grinding oil that is suitable for the material in order to significantly increase the tool life and the abrasive performance of the tools.
Use with hard or medium-hard COMBIDISC abrasive disc holders.

Ordering notes

Please order abrasive disc holder separately.

Safety notes

The maximum permitted peripheral speed is 50 m/s.
For safety reasons, the maximum permitted rotational speed indicated must never be exceeded.

Materials that can be worked: Annealed cast iron; Brass; Bronze; Cast steel; Cobalt-based alloys; Copper; Grey/nodular cast iron (GG/GJL, GGG/GJS); Hardened, heat-treated steels over 1.200 N/mm² (< 38 HRC); Stainless steel (INOX); Steel materials with a hardness > 54 HRC; Steels up to 1,200 N/mm² (< 38 HRC); Titanium

Applications: Deburring; Leveling; Roughening; Sharpening; Step-by-step fine grinding; Surface work; Working on edges; Work on weld seams

Drive types: Angle grinder; Cordless angle grinder; Drive spindle; Flexible shaft drive; Straight grinder

PFERDVALUE

PFERDEFFICIENCY

recommends COMBIDISC tools to reduce tool changing and setting-up time.

PFERDERGONOMICS

recommends COMBIDISC as an innovative tool solution to sustainably reduce the vibration, noise and dust produced during use and to improve comfort when working.