POLINOX cross buffs PNST

POLINOX non-woven cross buff PNST dia. 50 mm thread 8-32 UNC A100 for fine grinding and finishing

Item number:: 44698502
EAN:: 4007220899427

POLINOX non-woven cross buff PNST dia. 50 mm thread 8-32 UNC A100 for fine grinding and finishing 2

POLINOX non-woven cross buff PNST dia. 50 mm thread 8-32 UNC A100 for fine grinding and finishing Youtube

Technical data Change variant

Retailers-Search

Choose options

Dia. external

19 mm 25 mm 38 mm 50 mm

Grit size

80 100 280

Packaging unit

Reset Filter

Matching accessories & spare parts

Bolts/shanks BO PNST 6-75

Bolts/shanks BO PNST 6-125

Technical information

POLINOX non-woven cross buff PNST dia. 50 mm thread 8-32 UNC A100 for fine grinding and finishing

Abrasive: Aluminium oxide A
Dia. external: 50 mm
Grit size: 100
Max. RPM: 9500 RPM
Number, layers: 2 pcs.
RPM, optimum: 5500 RPM
Packaging unit: 20 pieces

Description

POLINOX cross buffs consist of non-woven polyamide abrasive, into which abrasive grain is integrated. The non-woven abrasive is star-shaped and stacked in layers which are connected in the centre. Particularly suitable for narrow application areas and hard-to-reach places such as drilled holes and indentations. POLINOX cross buffs are suitable for cleaning, deburring and fine grinding of inner surfaces and contours.

Advantages

Highly flexible, enabling optimal adjustment to the contour.
Cool grinding and low thermal load on the workpiece.
The open structure and high flexibility of the non-woven material prevents tool clogging.

Recommendations for use

For the best results, use at a recommended cutting speed of 10-20 m/s. This provides an ideal compromise between stock removal rate, surface quality, thermal load on the workpiece and tool wear.

Ordering notes

Please order compatible arbor separately.

Safety notes

The maximum permitted peripheral speed is 32 m/s.
For safety reasons, the maximum permitted rotational speed indicated must never be exceeded.

Materials that can be worked: Aluminium; Brass; Bronze; Cast steel; Cobalt-based alloys; Copper; Fibre-reinforced thermosetting plastics (GRP, CRP); Hardened, heat-treated steels over 1.200 N/mm² (< 38 HRC); Nickel-based alloys (e.g. Inconell and Hastelloy); Stainless steel (INOX); Steel materials with a hardness > 54 HRC; Steels up to 1,200 N/mm² (< 38 HRC); Thermoplastics; Titanium; Titanium alloys; Zinc

Applications: Cleaning; Deburring; Roughening; Step-by-step fine grinding; Structuring (matt finishing, brush matting and satin finishing); Surface work