Shank diameter 3 mm PZF WRC

Tungsten carbide profile cylinder burr PZF cyl. with radius end WRC dia. 03x20x65mm shank dia. 3mm for locksmiths, police and fire service

WRC 0320/3 PZF GL65

Item number:: 26007746
EAN:: 4007220425145

New

Technical data Change variant

Retailers-Search

Choose options

Dia. external

3 mm

Length, total

65 mm 80 mm

Reset Filter

Technical information

Tungsten carbide profile cylinder burr PZF cyl. with radius end WRC dia. 03x20x65mm shank dia. 3mm for locksmiths, police and fire service

Cut: PZF
Dia. external: 3 mm
Dia. shank: 3 mm
Length, cut: 20 mm
Length, total: 65 mm
RPM, grey cast iron, white cast iron: 14.000 - 28.000 RPM
RPM, hard non-ferrous metals: 14.000 - 28.000 RPM
RPM, hardened, heat-treated steels over 1,200 N/mm²: 14.000 - 28.000 RPM
RPM, rust and acid-resistant steels: 14.000 - 28.000 RPM
RPM, soft non-ferrous metals: 14.000 - 28.000 RPM
RPM, steels up to 1,200 N/mm²: 14.000 - 28.000 RPM
Packaging unit: 1 piece

Description

The profile cylinder burr PZF for locksmiths from PFERD TOOLS is a cylindrical burr with drill tip and cut cutting surfaces, which was developed specially for time-saving milling of locked profile cylinders with pull protection. The integrated drill tip enables accurate centring, meaning that the profile cylinder can be milled precisely. Thanks to the cut on the external surface and the twisted grooves, optimum chip removal is ensured. Tool jamming is therefore minimized and the risk of breakage is reduced. Furthermore, the innovative milling tool from PFERD TOOLS impresses with its good tool life, despite the challenging application.

Using conventional burrs takes several minutes to open a profile cylinder of a security lock. Thanks to its extremely high stock removal rate, PFERD TOOLS’ innovative solution usually enables you to complete this task in under one minute – depending on the lock.

Cylindrical burr with radius end for professional opening of conventional profile cylinders. The special tooth geometry of the WRC shape enables safe milling of the profile cylinder.

Advantages

Enormous time savings thanks to very high stock removal rate.
High-precision drilling thanks to centring point.
Less susceptible to breakage, as tool jamming is minimized.
Optimum chip removal.
Easy to use.
Good tool life.
Suitable for use on steel and stainless steel (INOX).

Recommendations for use

Use the burrs on powerful straight grinders that are, insofar as possible, speed-adjustable.
The optimum rotational speed and power output for the tool drive are required for cost-effective use of the burr. Recommended rotational speed range: 14,000–28,000 RPM.
Use the strike plate burr SBF from PFERD TOOLS in order to remove facings or security covers in front of the profile cylinder.

Materials that can be worked: Brass; Bronze; Case-hardened steels; Copper; Stainless steel (INOX); Steel; Steel, cast steel; Steel materials with a hardness > 54 HRC; Steels over 700 N/mm² (> 220 HB); Steels up to 700 N/mm² (< 220 HB); Tool steels

Applications: Cutting out holes; Deburring; Leveling; Milling; Milling out; Surface work

Drive types: Straight grinder

PFERD TOOLS VALUE

PFERD TOOLS EFFICIENCY

recommends profile cylinder burrs for cost-effective working with perfect results as quickly as possible.

Downloads

Shank diameter 3 mm PZF WRC

Tungsten carbide profile cylinder burr PZF cyl. with radius end WRC dia. 03x20x65mm shank dia. 3mm for locksmiths, police and fire service

WRC 0320/3 PZF GL65

PFERD TOOLS EFFICIENCY

PFERD TOOLS Newsletter subscription