Tungsten carbide burrs for general use, cut 3 PLUS HC-FEP, conical shape with radius end KEL

Tungsten carbide high-performance burr tree shape with radius end KEL dia. 12x30 mm shank dia. 6 mm Z3P HICOAT universal

Item number:: 21125224
EAN:: 4007220222621

Technical data Change variant

Retailers-Search

Choose options

Dia. external

10 mm 12 mm

Dia. shank

6 mm

Length, cut

20 mm 25 mm 30 mm

Length, total

60 mm 65 mm 70 mm

Reset Filter

Technical information

Tungsten carbide high-performance burr tree shape with radius end KEL dia. 12x30 mm shank dia. 6 mm Z3P HICOAT universal

Angle: 14 °
Cut: 3 PLUS HC-FEP
Dia. external: 12 mm
Dia. shank: 6 mm
Length, cut: 30 mm
Length, total: 2,756
Length, total: 70 mm
RPM from, hardened, heat-treated steels over 1,200 N/mm²: 7000 RPM
RPM from, steels up to 1,200 N/mm²: 12000 RPM
RPM to, hardened, heat-treated steels over 1,200 N/mm²: 12000 RPM
RPM to, steels up to 1,200 N/mm²: 20000 RPM
Radius corner design: 2.6 mm
Packaging unit: 1 piece

Description

Cut 3 PLUS with HICOAT coating HC-FEP is characterized by its high hardness and wear resistance. It enables effective chip removal through improved anti-adhesion characteristics and is highly temperature-resistant. It allows for a longer tool life and use at higher cutting speeds in comparison with uncoated burrs.

Conical burr with round radius end according to DIN 8032 with cut conforming to DIN 8033.

Advantages

The highly accurate concentricity enables impactfree working without creating chatter marks. This considerably reduces wear on the tool and tool drive.

Recommendations for use

If the smallest area of the burr diameter is being used, the recommended rotational speed can be increased accordingly.
To ensure costeffective use of burrs, use a higher rotational speed and cutting speed. Use burrs with a shank diameter of 6 mm with drives with a power output from 300 watts.

Materials that can be worked: Case-hardened steels; Cast steel; Hard aluminium alloys; Hardened, heat-treated steels over 1.200 N/mm² (< 38 HRC); Steel; Steel, cast steel; Steels over 700 N/mm² (> 220 HB); Steels up to 1,200 N/mm² (< 38 HRC); Steels up to 700 N/mm² (< 220 HB); Tool steels

Applications: Cutting out holes; Deburring; Leveling; Milling; Milling out; Surface work; Work on weld seams

Drive types: Drive spindle; Flexible shaft drive; Robot; Stationary machines; Straight grinder; Tool machine

PFERDVALUE

PFERDEFFICIENCY

recommends burrs with the HICOAT coating for working for long periods with low levels of fatigue, whilst saving resources and achieving perfect results as quickly as possible.

Downloads

Matching tool drive

Robot spindles for stationary application PGAS 4/220 RS PGAS 4/220 RS

Tungsten carbide burrs for general use, cut 3 PLUS HC-FEP, conical shape with radius end KEL

Tungsten carbide high-performance burr tree shape with radius end KEL dia. 12x30 mm shank dia. 6 mm Z3P HICOAT universal

PFERDEFFICIENCY

Matching tool drive

PFERD Newsletter subscription