Tungsten carbide burrs for high performance, STEEL HC-FEP, conical shape with radius end KEL

Tungsten carbide high-performance burr STEEL conical shape with radius end KEL dia. 12x30 mm shank dia. 6 mm HICOAT for steel

KEL 1230/6 STEEL HC-FEP

Item number:: 21125290
EAN:: 4007220222904

Tungsten carbide high-performance burr STEEL conical shape with radius end KEL dia. 12x30 mm shank dia. 6 mm HICOAT for steel 1

Tungsten carbide high-performance burr STEEL conical shape with radius end KEL dia. 12x30 mm shank dia. 6 mm HICOAT for steel 2

Technical data Change variant

Retailers-Search

Choose options

Dia. external

10 mm 12 mm

Dia. shank

6 mm

Length, cut

20 mm 30 mm

Length, total

60 mm 70 mm

Reset Filter

Technical information

Tungsten carbide high-performance burr STEEL conical shape with radius end KEL dia. 12x30 mm shank dia. 6 mm HICOAT for steel

Angle: 14 °
Cut: STEEL HC-FEP
Dia. external: 12 mm
Dia. shank: 6 mm
Length, cut: 30 mm
Length, total: 70 mm
RPM, hardened, heat-treated steels over 1,200 N/mm²: 12.000 - 24.000 RPM
RPM, steels up to 1,200 N/mm²: 12.000 - 24.000 RPM
Radius corner design: 2.6 mm
Packaging unit: 1 piece

Description

High-performance cut STEEL with HICOAT coating HC-FEP is characterized by its high degree of hardness and wear resistance. It enables effective chip removal through improved anti-adhesion characteristics and is highly temperature-resistant. It allows for a longer tool life and use at higher cutting speeds in comparison with uncoated burrs.

Conical burr with round radius end according to DIN 8032.

Advantages

The highly accurate concentricity enables impactfree working without creating chatter marks. This considerably reduces wear on the tool and tool drive.

Recommendations for use

If the smallest area of the burr diameter is being used, the recommended rotational speed can be increased accordingly.
To ensure costeffective use of burrs, use a higher rotational speed and cutting speed. Use burrs with a shank diameter of 6 mm with drives with a power output from 300 watts.

Safety notes

The very high stock removal rate can cause discolouration on the shank. This does not constitute a safety risk.

Materials that can be worked: Annealed cast iron; Black annealed cast iron (GTS, GJMB); Case-hardened steels; Cast iron; Cast steel; Cobalt-based alloys; Grey/nodular cast iron (GG/GJL, GGG/GJS); Hard aluminium alloys; Hardened, heat-treated steels over 1.200 N/mm² (< 38 HRC); High-temperature-resistant materials; Nickel-based alloys (e.g. Inconell and Hastelloy); Stainless steel (INOX); Steel; Steel, cast steel; Steels over 700 N/mm² (> 220 HB); Steels up to 1,200 N/mm² (< 38 HRC); Steels up to 700 N/mm² (< 220 HB); Tool steels; White annealed cast iron (GTW, GJMW)

Applications: Cutting out holes; Deburring; Leveling; Milling; Milling out; Surface work; Work on weld seams

Drive types: Drive spindle; Flexible shaft drive; Robot; Stationary machines; Straight grinder; Tool machine

PFERDVALUE

PFERD TOOLS EFFICIENCY recommends burrs with the HICOAT coating for working for long periods with low levels of fatigue, whilst saving resources and achieving perfect results as quickly as possible.